<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Abbey Maxwell, Author at Swift Fire Compliance</title>
	<atom:link href="https://swiftfirecompliance.co.uk/article/author/abbey-m/feed/" rel="self" type="application/rss+xml" />
	<link></link>
	<description></description>
	<lastBuildDate>Mon, 21 Sep 2026 15:00:20 +0000</lastBuildDate>
	<language>en-GB</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>
	<item>
		<title>Celebrating 12 months of Swift Fire Compliance!</title>
		<link>https://swiftfirecompliance.co.uk/article/celebrating-12-months-of-swift-fire-compliance/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Wed, 30 Sep 2026 07:00:00 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<category><![CDATA[Fire Damper Testing]]></category>
		<category><![CDATA[Fire dampers]]></category>
		<category><![CDATA[Kitchen extract cleaning]]></category>
		<category><![CDATA[Smoke dampers]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501813</guid>

					<description><![CDATA[<p>Swift Fire Compliance is Celebrating Its First Year of Operation. A subsidiary of Swiftclean, Swift Fire Compliance was set-up when it became clear to MD, Gary Nicholls, that the majority of the work Swiftclean carries out is more about fire prevention and compliance than cleaning. “More than 70% of our turnover is in the fire  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/celebrating-12-months-of-swift-fire-compliance/">Celebrating 12 months of Swift Fire Compliance!</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="has-awb-color-5-color has-text-color has-link-color has-large-font-size wp-elements-3 wp-block-paragraph"><strong>Swift Fire Compliance is Celebrating Its First Year of Operation.</strong></p>


<div class="wp-block-image">
<figure class="alignright size-full"><img fetchpriority="high" decoding="async" width="250" height="230" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-324-1.jpg" alt="" class="wp-image-4501829" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-324-1-200x184.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-324-1.jpg 250w" sizes="(max-width: 250px) 100vw, 250px" /></figure>
</div>


<p class="wp-block-paragraph">A subsidiary of Swiftclean, Swift Fire Compliance was set-up when it became clear to MD, Gary Nicholls, that the majority of the work Swiftclean carries out is more about fire prevention and compliance than cleaning.</p>



<p class="wp-block-paragraph">“More than 70% of our turnover is in the fire compliance world, so it seemed an obvious next step to create a business arm that represents this,” said Gary. “From kitchen extract cleaning and fire damper inspection and testing, to upskilling the wider sector in these areas through our dedicated training academy and also advising industry bodies in their own standard setting, we want to position ourselves as the fire safety experts.”</p>



<hr class="wp-block-separator has-text-color has-vivid-red-color has-alpha-channel-opacity has-vivid-red-background-color has-background is-style-dots"/>



<p class="wp-block-paragraph">The company works closely with BESA, assisting the association in developing best practice. Gary was heavily involved in developing the TR19 Grease and Air, guidance/specification documents for ventilation hygiene and in the case of TR19 Grease specifically, fire prevention.</p>



<blockquote class="wp-block-quote is-layout-flow wp-block-quote-is-layout-flow">
<p class="wp-block-paragraph">&#8220;For many years, we’ve worked with <strong><span style="text-decoration: underline;"><a href="https://www.thebesa.com/" target="_blank" rel="noreferrer noopener">BESA</a></span></strong> and our industry colleagues to really set a benchmark for effective maintenance in these areas and to document how it should be done properly,” added Gary.</p>
</blockquote>



<p class="wp-block-paragraph">It was the Grenfell tragedy that sadly alerted Gary to the high standards his business was setting. Now, the Building Safety Act, bought in as a direct result of Grenfell in 2022, demands robust record keeping, including pictorial evidence of fire safety measures, such as dampers. At the time of the fire, however, ‘record keeping’ was commonly just a box ticking exercise, listing when works were carried out, with little proof of efficacy.</p>



<p class="wp-block-paragraph">Gary was interviewed by the Metropolitan Police, along with other contractors who had worked on the building as part of the Grenfell investigation – Swiftclean had cleaned the common bathroom extraction systems and installed fire safety grilles at every extract inlet point within the ill-fated tower.</p>



<blockquote class="wp-block-quote is-layout-flow wp-block-quote-is-layout-flow">
<p class="wp-block-paragraph">&#8220;Grenfell was a horrific wake-up call for the whole of the building safety and compliance sector. What we were doing was correct, however. Our approach to documenting our work, which was above and beyond, is now industry best practice&#8221;</p>
</blockquote>



<h2 class="wp-block-heading">Supporting Organisations Across the UK</h2>



<p class="wp-block-paragraph">During this past year, Swift Fire Compliance’s approach has further been cemented with updated BESA standard, DW145, which focuses on fire damper installation and testing, calling for the evidence-based, ‘golden thread’ supporting approach that Swiftclean has long been advocates of.</p>



<blockquote class="wp-block-quote is-layout-flow wp-block-quote-is-layout-flow">
<p class="wp-block-paragraph">“As experts in our field, we are often called upon as witnesses to assist courts in disputes regarding fires that have occurred in or through kitchen extraction systems. We analyse the evidence presented to clarify whether organisations have or haven’t followed the appropriate maintenance required to prevent fires from spreading through the kitchen extraction system.&#8221;</p>



<p class="wp-block-paragraph">“Our business is about helping customers meet their fire safety obligations &#8211; the legal requirements they must comply with in terms of reducing fire risk and ensuring compliance, crucial for safety and compliance with the requirements of insurance policies.”</p>
</blockquote>


<div class="wp-block-image">
<figure class="alignright size-full"><img decoding="async" width="250" height="188" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Group-learning5.jpg" alt="" class="wp-image-4501826" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Group-learning5-200x150.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Group-learning5.jpg 250w" sizes="(max-width: 250px) 100vw, 250px" /></figure>
</div>


<h2 class="wp-block-heading">Investing in Fire Damper Training</h2>



<p class="wp-block-paragraph">Swift Fire Compliance has further cemented this aim by creating a dedicated fire damper training facility in the Swiftclean Training Academy, used to upskill internal staff and also external engineers. The company recently launched a new fire damper testing course which was developed with The BESA in-line with the updated DW145 guidance.</p>



<p class="wp-block-paragraph">Swift Fire Compliance has also created a number of useful free to access guidance documents, including ‘<strong><span style="text-decoration: underline;"><a href="https://swiftfirecompliance.co.uk/guide/the-ultimate-guide-to-fire-smoke-control-dampers/" target="_blank" rel="noreferrer noopener">The Ultimate Guide to Fire and Smoke Control dampers in 2026</a></span></strong>.</p>



<blockquote class="wp-block-quote is-layout-flow wp-block-quote-is-layout-flow">
<p class="wp-block-paragraph">“Since we set up Swift Fire Compliance, we have received hundreds of enquiries from across the commercial and public services sectors – hotels, hospitals, schools, councils, leisure facilities and of FM providers; our biggest customer-base. We are often called upon as fire compliance specialist for major FM companies throughout the UK.”</p>
</blockquote>



<h2 class="wp-block-heading">Looking Ahead for Swift Fire Compliance</h2>



<blockquote class="wp-block-quote is-layout-flow wp-block-quote-is-layout-flow">
<p class="wp-block-paragraph">“The future of Swift Fire Compliance looks promising; it’s our biggest growth area and although this arm of the business has only been a separate entity for the past year, our expertise has been honed over many decades.&#8221;</p>
</blockquote>



<p class="has-awb-color-1-color has-awb-color-3-background-color has-text-color has-background has-link-color has-normal-font-size wp-elements-4 wp-block-paragraph"><em>“Ultimately, compliance is everything – it prevents incident and if, sadly, the unavoidable happens, it safeguards individual businesses against insurance claims. There was clearly a lot wrong at Grenfell, but we could be sure that our part of the building at least, had been installed and maintained correctly, with no question and we had the evidence to support this. We want to spread this message and help other businesses meet the standards set in the Building Safety Act. A tragedy such as Grenfell must never happen again and we hope that we can be part of the solution.”</em></p>



<div style="height:36px" aria-hidden="true" class="wp-block-spacer"></div>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/celebrating-12-months-of-swift-fire-compliance/">Celebrating 12 months of Swift Fire Compliance!</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Make the Cricket Off-Season Count: Complete Essential Compliance Work Now</title>
		<link>https://swiftfirecompliance.co.uk/article/make-the-cricket-off-season-count-complete-essential-compliance-work-now/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Thu, 17 Sep 2026 09:45:00 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<category><![CDATA[Fire Damper Testing]]></category>
		<category><![CDATA[Fire dampers]]></category>
		<category><![CDATA[Kitchen extract cleaning]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501803</guid>

					<description><![CDATA[<p>When the final ball has been bowled and the crowds have gone home, the work behind the scenes at a cricket ground continues. The quieter off-season provides an ideal opportunity to complete essential compliance work across pavilions, stands, hospitality suites, kitchens, changing rooms and offices - with far less disruption to fixtures, events and visitors.  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/make-the-cricket-off-season-count-complete-essential-compliance-work-now/">Make the Cricket Off-Season Count: Complete Essential Compliance Work Now</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="has-awb-color-5-color has-text-color has-link-color has-normal-font-size wp-elements-6 wp-block-paragraph"><strong>When the final ball has been bowled and the crowds have gone home, the work behind the scenes at a cricket ground continues. The quieter off-season provides an ideal opportunity to complete essential compliance work across pavilions, stands, hospitality suites, kitchens, changing rooms and offices &#8211; with far less disruption to fixtures, events and visitors.</strong></p>



<p class="wp-block-paragraph">Swiftclean can coordinate a range of air, water and fire compliance services during this quieter period, with particular support available for fire and smoke damper compliance.</p>



<h2 class="wp-block-heading"><strong>Why Fire Dampers Matter at Cricket Grounds</strong></h2>


<div class="wp-block-image">
<figure class="alignright size-full"><img decoding="async" width="300" height="298" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Fire-damper-testing-Richard-Piggott.jpg" alt="" class="wp-image-4501809" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Fire-damper-testing-Richard-Piggott-66x66.jpg 66w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Fire-damper-testing-Richard-Piggott-150x150.jpg 150w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Fire-damper-testing-Richard-Piggott-200x199.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Fire-damper-testing-Richard-Piggott.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /></figure>
</div>


<p class="wp-block-paragraph">Cricket grounds can be complex estates, often combining older structures with newer stands, hospitality areas and refurbished facilities. Ventilation ductwork may pass through numerous fire-resisting walls and floors throughout these buildings.</p>



<p class="wp-block-paragraph">Fire and smoke dampers are installed within ductwork at these compartment boundaries. In the event of a fire, they are designed to close and help restrict the spread of flames and smoke. However, a damper may not perform as intended if it has been incorrectly installed, damaged, obstructed or poorly maintained.</p>



<p class="wp-block-paragraph">Because dampers are usually hidden above ceilings or inside ductwork, problems can remain unnoticed without a suitable inspection and testing programme.</p>



<p class="wp-block-paragraph">Fire dampers can become affected by:</p>



<ul class="wp-block-list">
<li>Damage to the damper or surrounding components</li>



<li>Corrosion or deterioration</li>



<li>Obstructions within the ductwork or damper assembly</li>



<li>Debris and contamination</li>



<li>Poor or inadequate access</li>



<li>Problems with installation</li>



<li>Issues with associated fire stopping</li>



<li>Lack of <a href="https://swiftfirecompliance.co.uk/fire-damper-testing/"><span style="text-decoration: underline;">inspection and maintenance</span></a></li>
</ul>



<p class="wp-block-paragraph">Because many fire dampers are concealed above ceilings or within ductwork, problems can remain unnoticed unless the assets are properly identified, accessed and tested.</p>



<div style="font-family:'Baloo Chettan 2', 'Baloo Chettan', Arial, sans-serif; background:#f1f6fb; border-left:6px solid #084686; padding:18px 20px; margin:28px 0; border-radius:6px;"> <strong style="color:#084686; font-size:19px;">Off-Season Tip for Cricket Grounds</strong><br> <span style="color:#333333; font-size:16px; line-height:1.6;"> Use the quieter months to access areas that become difficult to reach during the cricket season. This can include ceiling voids, service risers, kitchens, hospitality areas and plant rooms where fire safety and ventilation equipment may be located. </span> </div>



<h2 class="wp-block-heading"><strong>Understanding the Compliance Requirements</strong></h2>



<h3 class="wp-block-heading">Regulatory Reform (Fire Safety) Order 2005</h3>



<p class="wp-block-paragraph"><strong><span style="text-decoration: underline;"><a href="https://www.legislation.gov.uk/uksi/2005/1541/contents">The Regulatory Reform (Fire Safety) Order 2005</a></span></strong> applies to non-domestic premises in England and Wales. Article 17 requires relevant fire-safety facilities, equipment and devices to be subject to an appropriate maintenance system and kept in efficient working order and good repair. Responsibility rests with the building’s “responsible person”.</p>



<p class="wp-block-paragraph"><a href="https://www.legislation.gov.uk/uksi/2005/1541/article/17"><strong><span style="text-decoration: underline;">Read the legislation</span></strong></a></p>



<h3 class="wp-block-heading">BS 9999:2017</h3>



<p class="wp-block-paragraph">BS 9999:2017 is not legislation, but a recognised British Standard providing recommendations for fire safety in the design, management and use of buildings. It supports the ongoing management of fire precautions throughout a building’s life.</p>



<p class="wp-block-paragraph"><a href="https://knowledge.bsigroup.com/products/fire-safety-in-the-design-management-and-use-of-buildings-code-of-practice"><strong><span style="text-decoration: underline;">View the BS 9999 Overview</span></strong></a></p>



<h3 class="wp-block-heading">BESA DW145</h3>



<p class="wp-block-paragraph">BESA’s DW145 provides detailed industry guidance covering the design, selection, installation, inspection and maintenance of fire and smoke dampers. The updated guidance particularly emphasises competence, suitable access, asset referencing, photographic evidence and accurate records.</p>



<p class="wp-block-paragraph"><a href="https://publications.thebesa.com/products/installation-maintenance-fire-dampers"><strong><span style="text-decoration: underline;">Learn more about DW145</span></strong></a></p>



<p class="wp-block-paragraph">Together, these requirements and recommendations highlight why fire dampers should be properly identified, accessible, tested and supported by reliable compliance evidence.</p>



<div style="font-family:'Baloo Chettan 2', 'Baloo Chettan', Arial, sans-serif; background:#D37930; padding:20px 22px; margin:28px 0; border-radius:6px; color:#ffffff;"> <strong style="color:#ffffff; font-size:19px;">Keep Your Compliance Evidence Up to Date</strong><br> <span style="color:#ffffff; font-size:16px; line-height:1.6;"> A testing programme should produce useful evidence, not simply a date in a calendar. Keep records showing which dampers were inspected, the results of testing, defects identified, photographs where appropriate and any remedial action required. </span> </div>



<h2 class="wp-block-heading">Why Choose a Specialist Compliance Provider?</h2>



<p class="wp-block-paragraph">Compliance work should be carried out by people with the appropriate knowledge, skills and experience for the task.</p>



<p class="wp-block-paragraph">Swiftclean has more than 40 years of experience supporting organisations with specialist building compliance services.</p>



<p class="wp-block-paragraph">Swiftclean is also an accredited training centre delivering the BESA DW145 Fire Damper Inspection and Maintenance course through the Swiftclean Training Academy.</p>



<p class="wp-block-paragraph">This commitment to training and technical competence supports our approach to maintaining specialist knowledge within the ventilation hygiene and fire damper sectors.</p>



<h2 class="wp-block-heading"><strong>How Swiftclean Can Help</strong></h2>


<div class="wp-block-image">
<figure class="alignright size-full"><img decoding="async" width="300" height="316" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Access-Panel-Before.jpg" alt="" class="wp-image-4501808" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Access-Panel-Before-200x211.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Access-Panel-Before-285x300.jpg 285w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/Access-Panel-Before.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /></figure>
</div>


<p class="wp-block-paragraph">Our fire damper service can include:</p>



<ul class="wp-block-list">
<li>Locating and identifying fire and smoke dampers, including asset tagging</li>



<li>Visual inspections and function testing</li>



<li>Checking that each damper can close fully and reopen</li>



<li>Identifying damaged, obstructed or inaccessible dampers, and providing recommendations to achieve compliance</li>



<li>Highlighting apparent installation and fire-stopping concerns</li>



<li>Installing access doors where suitable access is unavailable</li>



<li>Completing necessary remedial works</li>



<li>Retesting dampers following repairs</li>



<li>Providing detailed reports with photographic evidence</li>
</ul>



<p class="wp-block-paragraph">A clear post-visit compliance report gives facilities teams visibility of the assets inspected, their condition, the results of testing and any further action required. This helps cricket grounds maintain an accurate compliance record and prioritise remedial work.</p>



<p class="wp-block-paragraph">Swiftclean is also an accredited training centre delivering the BESA DW145 Fire Damper Inspection and Maintenance course, reinforcing our commitment to technical competence and current industry good practice.</p>



<h2 class="wp-block-heading"><strong>Bring Other Compliance Services into Your Off-Season Programme</strong></h2>


<div class="wp-block-image">
<figure class="alignright size-full"><img decoding="async" width="300" height="200" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-146.jpg" alt="" class="wp-image-4501807" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-146-200x133.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/09/jb-146.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /></figure>
</div>


<p class="wp-block-paragraph">Fire damper work can be coordinated with Swiftclean’s other specialist services, including:</p>



<ul class="wp-block-list">
<li>TR19 Grease kitchen extract cleaning</li>



<li>TR19 Air ventilation ductwork cleaning</li>



<li>Legionella risk assessments, monitoring and water hygiene services</li>



<li>LEV examination, testing and cleaning</li>
</ul>



<p class="wp-block-paragraph">Combining several services into one planned programme can reduce the number of contractors and visits you need to manage. Swiftclean offers nationwide coverage, flexible scheduling, clear reporting and the option of a packaged compliance service with one dedicated point of contact.</p>



<div style="font-family:'Baloo Chettan 2', 'Baloo Chettan', Arial, sans-serif; background:#D37930; padding:20px 22px; margin:28px 0; border-radius:6px; color:#ffffff;"> <strong style="color:#ffffff; font-size:19px;">One Off-Season Programme, Multiple Compliance Tasks</strong><br> <span style="color:#ffffff; font-size:16px; line-height:1.6;"> Coordinating multiple planned services during the quieter period can make it easier to manage access, contractor visits, documentation and remedial work across your site. </span> </div>



<div style="font-family:'Baloo Chettan 2', 'Baloo Chettan', Arial, sans-serif; background:#f1f6fb; border-left:6px solid #084686; padding:18px 20px; margin:28px 0; border-radius:6px;"> <strong style="color:#084686; font-size:19px;">Plan Remedial Work Before the Fixtures Return</strong><br> <span style="color:#333333; font-size:16px; line-height:1.6;"> If testing identifies remedial work, allow enough time to investigate, obtain quotations, complete the work and retest where appropriate. Leaving remedial action until the season is underway can make access and scheduling more difficult. </span> </div>



<h2 class="wp-block-heading"><strong>Get Ahead Before the New Season</strong></h2>



<p class="wp-block-paragraph">Once fixtures, hospitality bookings and events return, gaining access to key areas can become much more difficult. Planning work during the off-season gives your team time to inspect critical systems, complete remedial actions and address gaps in your compliance records before the ground becomes busy again.</p>



<p class="wp-block-paragraph">To discuss fire damper testing or arrange a wider compliance review for your cricket ground, contact the Swiftclean team today.</p>



<div style="font-family:'Baloo Chettan 2', 'Baloo Chettan', Arial, sans-serif; background:#084686; border-radius:14px; padding:30px; margin:35px 0; text-align:center; color:#ffffff;"> <h2 style="margin:0 0 12px; font-size:27px; line-height:1.3; color:#ffffff;">Make the Most of Your Cricket Ground&#8217;s Off-Season</h2> <p style="margin:0 auto 22px; max-width:720px; font-size:17px; line-height:1.6; color:#ffffff;"> Need to arrange fire damper testing or coordinate wider compliance work before the new season? Speak to the Swiftclean team about your requirements. </p> <a href="https://swiftfirecompliance.co.uk/contact/" style="display:inline-block; background:#D37930; color:#ffffff; text-decoration:none; font-size:17px; font-weight:700; padding:14px 24px; border-radius:8px; margin:5px;"> Contact Swiftclean </a> <a href="tel:0800243471" style="display:inline-block; background:#ffffff; color:#084686; text-decoration:none; font-size:17px; font-weight:700; padding:14px 24px; border-radius:8px; margin:5px;"> Call 0800 243 471 </a> </div>



<h2 class="wp-block-heading"><strong>Cricket Ground Fire Safety FAQs</strong></h2>



<h3 class="wp-block-heading">How often should fire dampers be tested?</h3>



<p class="wp-block-paragraph">The appropriate inspection and maintenance arrangements depend on the building, its fire safety strategy, the damper installation and relevant guidance. A suitable programme should be established by those responsible for the building, taking account of applicable standards and industry guidance.</p>



<h3 class="wp-block-heading">Why should cricket grounds test fire dampers?</h3>



<p class="wp-block-paragraph">Cricket grounds can contain extensive ventilation systems running through different areas and fire compartments. Testing helps identify issues such as inaccessible, obstructed, damaged or poorly functioning dampers so that appropriate action can be considered.</p>



<h3 class="wp-block-heading">What happens if a fire damper fails a test?</h3>



<p class="wp-block-paragraph">The issue should be recorded and investigated to establish the appropriate remedial action. Depending on the defect, this could involve cleaning, repair, improving access, replacement or addressing installation concerns. Where remedial work is completed, retesting can confirm the outcome.</p>



<h3 class="wp-block-heading">Can fire damper testing be completed during the cricket off-season?</h3>



<p class="wp-block-paragraph">Yes. The off-season can provide a practical opportunity to arrange inspections, testing and remedial works when some areas of a cricket ground are quieter and easier to access. Scheduling will depend on the individual site and its operational requirements.</p>



<h3 class="wp-block-heading">Can other compliance work be completed at the same time?</h3>



<p class="wp-block-paragraph">Potentially. Cricket grounds may have ventilation, kitchen extract, water hygiene and LEV requirements alongside fire damper responsibilities. Coordinating planned services can reduce the number of separate contractor visits and make access easier to manage.</p>



<h3 class="wp-block-heading">Why is documentation important for fire damper testing?</h3>



<p class="wp-block-paragraph">Clear records provide facilities teams with evidence of what was inspected and the outcome. Useful documentation can include asset references, test results, defects, photographs and details of recommended or completed remedial work.</p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/make-the-cricket-off-season-count-complete-essential-compliance-work-now/">Make the Cricket Off-Season Count: Complete Essential Compliance Work Now</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What Should You Do With Smoke &#038; Fire Dampers After a Fire?</title>
		<link>https://swiftfirecompliance.co.uk/article/what-should-you-do-with-smoke-fire-dampers-after-a-fire/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Mon, 07 Sep 2026 08:56:37 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<category><![CDATA[Fire Damper Testing]]></category>
		<category><![CDATA[Fire dampers]]></category>
		<category><![CDATA[Smoke dampers]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501713</guid>

					<description><![CDATA[<p>After the Fire: Are Your Fire and Smoke Dampers Still Safe? Once a fire has been extinguished, attention naturally turns to visible damage. However, hidden fire-safety components, including fire and smoke dampers, must also be assessed before the building’s ventilation systems are returned to normal use. Even if a damper LOOKS undamaged, exposure to heat,  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/what-should-you-do-with-smoke-fire-dampers-after-a-fire/">What Should You Do With Smoke &amp; Fire Dampers After a Fire?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading"><strong>After the Fire: Are Your Fire and Smoke Dampers Still Safe?</strong></h2>



<p class="has-normal-font-size wp-block-paragraph"><strong>Once a fire has been extinguished, attention naturally turns to visible damage. However, hidden fire-safety components, including fire and smoke dampers, must also be assessed before the building’s ventilation systems are returned to normal use.</strong></p>



<p class="has-normal-font-size wp-block-paragraph"><strong>Even if a damper LOOKS undamaged, exposure to heat, smoke, soot, firefighting water or extinguishing chemicals may have affected its operation and fire resistance.</strong></p>



<p class="wp-block-paragraph">Fire and smoke dampers form part of a wider fire safety strategy. Their purpose is to help control the spread of fire and smoke through ventilation ductwork and across compartment lines. If a damper has operated during an incident, has been exposed to heat, or may have been affected by smoke and firefighting activity, it should be treated as potentially compromised until a competent assessment confirms otherwise.</p>



<p class="wp-block-paragraph"><strong>This guide explains the practical steps building owners, <span style="text-decoration: underline;"><a href="https://swiftfirecompliance.co.uk/article/who-is-responsible-for-fire-damper-testing-in-the-uk/" target="_blank" rel="noreferrer noopener">Responsible Person</a> </span>and facilities teams should take after a fire or smoke incident.</strong></p>



<p class="has-awb-color-1-color has-vivid-red-background-color has-text-color has-background has-link-color has-normal-font-size wp-elements-8 wp-block-paragraph"><em><strong>This article provides general guidance. Post-fire assessments should be undertaken by competent specialists in accordance with the building’s fire strategy, current legislation and manufacturer requirements.</strong></em></p>



<h2 class="wp-block-heading">Why Dampers Cannot Simply Be Reset and Returned to Service</h2>



<p class="wp-block-paragraph">Fire and smoke dampers form part of a building&#8217;s passive and active fire safety strategy. Their purpose is to help control the spread of fire and smoke through ventilation ductwork and across compartment lines, protecting escape routes, buying critical time for evacuation and limiting damage to the building.</p>



<p class="wp-block-paragraph">When a damper has operated during a fire incident, or has been exposed to heat, smoke or firefighting activity in an affected area, it should be treated as potentially compromised until a competent assessment confirms otherwise.</p>



<p class="wp-block-paragraph">Resetting an activated damper, or cleaning away surface soot, does not demonstrate that the damper remains safe or that its fire resistance is intact. Replacing a fusible link, for example, restores the thermal trigger mechanism but does not address any underlying damage to the blade mechanism, frame, seals or surrounding construction that may have occurred during the incident.</p>



<div style="background-color:#D37930; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Critical reminder:</strong> Do not reset activated fire or smoke dampers and return them to service without first arranging a competent inspection. A damper that looks undamaged may still have been compromised by heat exposure, contamination or firefighting activity. The only reliable way to confirm its operational status is through a specialist post-fire assessment.</p>
</div>



<h2 class="wp-block-heading"><strong>What should you do after a fire or smoke incident?</strong></h2>



<h3 class="wp-block-heading"><strong>1. Do not simply reset the dampers</strong></h3>



<p class="wp-block-paragraph">An activated damper should not be reset and returned to service without inspection. Replacing a fusible link or cleaning away soot does not, on its own, demonstrate that the damper remains safe.</p>



<h3 class="wp-block-heading"><strong>2. Identify all affected dampers</strong></h3>



<p class="wp-block-paragraph">Locate every fire, fire-and-smoke and smoke control damper within, adjoining or serving the affected area. This should include dampers in ducts that may have carried hot gases or smoke away from the fire.</p>



<div style="background-color:#084686; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Key step:</strong> Before ventilation or smoke control systems are returned to service following a fire, all affected fire and smoke dampers must be inspected, tested and confirmed as safe by a competent specialist. This is not a step that can be deferred or bypassed without creating additional safety risk.</p>
</div>



<h3 class="wp-block-heading"><strong>3. Arrange a competent inspection</strong></h3>



<p class="wp-block-paragraph">A competent fire-damper or smoke-control specialist should inspect the dampers and their surrounding installations for:</p>



<table style="width:100%; border-collapse:collapse; margin:30px 0; font-family:sans-serif;">
  <thead>
    <tr>
      <th style="background-color:#084686; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Inspection Area</th>
      <th style="background-color:#084686; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">What to Look For</th>
    </tr>
  </thead>
  <tbody>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Heat damage and distortion</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Warping, deformation or visible heat damage to the frame, blades or housing</td>
    </tr>
    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Soot, debris and contamination</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Contamination that could prevent the damper from closing fully or operating correctly</td>
    </tr>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Corrosion from water or chemicals</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Damage caused by firefighting water or extinguishing chemicals affecting metal components</td>
    </tr>
    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Damaged blades, seals, springs or linkages</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Mechanical damage affecting the damper&#8217;s ability to close correctly and maintain its seal</td>
    </tr>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Actuator, wiring and control faults</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Damage to motorised actuators, control interfaces or power supplies affecting smoke damper operation</td>
    </tr>
    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; font-weight:600;">Surrounding construction and penetration seals</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Damage to the surrounding wall or floor and integrity of firestopping around the damper frame</td>
    </tr>
  </tbody>
</table>



<p class="wp-block-paragraph">Where a damper has been directly exposed to fire, heat or firefighting media, we would recommend that the damper manufacturer should also be consulted for further advice.</p>



<h3 class="wp-block-heading"><strong>4. Test the complete system</strong></h3>



<p class="wp-block-paragraph">Affected dampers must be functionally tested to confirm that they travel fully to the required position and reset correctly.</p>



<p class="wp-block-paragraph">For smoke control systems, testing should include the complete cause-and-effect sequence, not just the individual damper. Controls, alarms, actuators, position indicators, fans and system interfaces should all operate as intended.</p>



<div style="height:36px" aria-hidden="true" class="wp-block-spacer"></div>



<div style="background-color:#1C97CF; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Important for smoke control systems:</strong> Testing individual smoke dampers in isolation is not sufficient following a fire incident. The complete cause-and-effect sequence for the smoke control system must be verified, including controls, fans, alarms and all interfaces. A damper that operates correctly in isolation may still be part of a system that does not perform as intended.</p>
</div>



<h3 class="wp-block-heading"><strong>5. Replace anything that cannot be verified</strong></h3>



<p class="wp-block-paragraph">Replace the damper where its damaged, distorted or heavily contaminated; it fails to operate correctly; its fire or smoke performance can no longer be demonstrated; the manufacturer recommends replacement and/ or suitable approved replacement parts are unavailable.</p>



<p class="wp-block-paragraph">Any activated fusible links or other single-use thermal devices must be replaced with correctly specified, manufacturer-approved components.</p>



<h3 class="wp-block-heading"><strong>6. Record the findings</strong></h3>



<p class="wp-block-paragraph">It is essential to maintain a clear record of the dampers inspected along with their locations, any damage or contamination identified, accompanying photographs, parts or dampers replaced, functional and system test results, and the approval to return the system to service.</p>



<p class="wp-block-paragraph">These records should be retained with the building’s fire-safety information.</p>



<h2 class="wp-block-heading">Why Post-Fire Damper Assessment Matters Legally</h2>



<p class="wp-block-paragraph">Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person has a continuing legal duty to ensure that fire safety measures within the building are maintained in an efficient state and in good working order. A fire event does not suspend this duty. It creates additional urgency to verify that compromised fire safety components are identified and either confirmed as serviceable or replaced.</p>



<p class="wp-block-paragraph">Failure to carry out a competent post-fire assessment before returning ventilation systems to service could constitute a breach of fire safety legislation, and may affect the outcome of any subsequent insurance claim or regulatory investigation.</p>



<h2 class="wp-block-heading"><strong>Don’t assume; inspect and verify</strong></h2>



<p class="wp-block-paragraph">A damper exposed to fire should always be treated as potentially compromised. Before ventilation or smoke-control systems are returned to service, affected dampers and penetration seals must be inspected, tested and, where necessary, replaced.</p>



<div style="height:36px" aria-hidden="true" class="wp-block-spacer"></div>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
<h3 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Need a Post-Fire Fire Damper Assessment?</h3>
<p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;">Swift Fire Compliance provides competent post-fire fire and smoke damper inspections, functional testing and replacement services for buildings across the UK. If you have experienced a fire or smoke incident and need your dampers assessed, contact our team today.</p>
<a href="https://swiftfirecompliance.co.uk/contact/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block; margin-right:10px;">Contact Our Team</a>
<a href="tel:0800243471" style="background-color:#084686; color:#ffffff; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Call Us: 0800 243 471</a>
</div>



<div style="height:36px" aria-hidden="true" class="wp-block-spacer"></div>



<h2 class="wp-block-heading">Your Post-Fire Damper Assessment Questions Answered</h2>



<div data-wp-context="{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }" data-wp-interactive="core/accordion" role="group" class="wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow">
<div data-wp-class--is-open="state.isOpen" data-wp-context="{ &quot;id&quot;: &quot;accordion-item-1&quot;, &quot;openByDefault&quot;: false }" data-wp-init="callbacks.initAccordionItems" data-wp-on-window--hashchange="callbacks.hashChange" class="wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow">
<h3 class="wp-block-accordion-heading"><button aria-expanded="false" aria-controls="accordion-item-1-panel" data-wp-bind--aria-expanded="state.isOpen" data-wp-on--click="actions.toggle" id="accordion-item-1" type="button" class="wp-block-accordion-heading__toggle"><span class="wp-block-accordion-heading__toggle-title"><strong>Do fire dampers need to be replaced after a fire?</strong></span><span class="wp-block-accordion-heading__toggle-icon" aria-hidden="true">+</span></button></h3>



<div aria-labelledby="accordion-item-1" data-wp-bind--hidden="state.isHidden" data-wp-on--beforematch="actions.handleBeforeMatch" id="accordion-item-1-panel" role="region" class="wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow">
<p class="wp-block-paragraph">Not necessarily, but they must be inspected and tested by a competent specialist before being returned to service. Where inspection identifies visible damage, distortion, contamination that cannot be safely removed, or where functional testing confirms the damper does not operate correctly, replacement will be required. The damper manufacturer should also be consulted where there has been direct exposure to fire or firefighting media.<br></p>
</div>
</div>
</div>



<div data-wp-context="{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }" data-wp-interactive="core/accordion" role="group" class="wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow">
<div data-wp-class--is-open="state.isOpen" data-wp-context="{ &quot;id&quot;: &quot;accordion-item-2&quot;, &quot;openByDefault&quot;: false }" data-wp-init="callbacks.initAccordionItems" data-wp-on-window--hashchange="callbacks.hashChange" class="wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow">
<h3 class="wp-block-accordion-heading"><button aria-expanded="false" aria-controls="accordion-item-2-panel" data-wp-bind--aria-expanded="state.isOpen" data-wp-on--click="actions.toggle" id="accordion-item-2" type="button" class="wp-block-accordion-heading__toggle"><span class="wp-block-accordion-heading__toggle-title"><strong>Can a fire damper be reused after it has activated?</strong></span><span class="wp-block-accordion-heading__toggle-icon" aria-hidden="true">+</span></button></h3>



<div aria-labelledby="accordion-item-2" data-wp-bind--hidden="state.isHidden" data-wp-on--beforematch="actions.handleBeforeMatch" id="accordion-item-2-panel" role="region" class="wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow">
<p class="wp-block-paragraph">Potentially, but only after it has been properly inspected and tested. An activated damper should never simply be reset and returned to service without assessment. Any single-use thermal components such as fusible links must always be replaced with manufacturer-approved equivalents. If the damper passes a full post-fire inspection and functional test and the manufacturer does not recommend replacement, it may be returned to service with the findings documented.<br></p>
</div>
</div>
</div>



<div data-wp-context="{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }" data-wp-interactive="core/accordion" role="group" class="wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow">
<div data-wp-class--is-open="state.isOpen" data-wp-context="{ &quot;id&quot;: &quot;accordion-item-4&quot;, &quot;openByDefault&quot;: false }" data-wp-init="callbacks.initAccordionItems" data-wp-on-window--hashchange="callbacks.hashChange" class="wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow">
<h3 class="wp-block-accordion-heading"><button aria-expanded="false" aria-controls="accordion-item-4-panel" data-wp-bind--aria-expanded="state.isOpen" data-wp-on--click="actions.toggle" id="accordion-item-4" type="button" class="wp-block-accordion-heading__toggle"><span class="wp-block-accordion-heading__toggle-title"><strong>How quickly should post-fire damper assessments be arranged?</strong></span><span class="wp-block-accordion-heading__toggle-icon" aria-hidden="true">+</span></button></h3>



<div aria-labelledby="accordion-item-4" data-wp-bind--hidden="state.isHidden" data-wp-on--beforematch="actions.handleBeforeMatch" id="accordion-item-4-panel" role="region" class="wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow">
<p class="wp-block-paragraph">As quickly as possible. Ventilation and smoke control systems should not be returned to normal operation until affected dampers have been assessed and confirmed as serviceable. The urgency of the assessment will depend on the extent of the incident and the areas affected, but it should be treated as a priority rather than a deferred maintenance task.<br></p>



<div data-wp-context="{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }" data-wp-interactive="core/accordion" role="group" class="wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow">
<div data-wp-class--is-open="state.isOpen" data-wp-context="{ &quot;id&quot;: &quot;accordion-item-3&quot;, &quot;openByDefault&quot;: false }" data-wp-init="callbacks.initAccordionItems" data-wp-on-window--hashchange="callbacks.hashChange" class="wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow">
<h3 class="wp-block-accordion-heading"><button aria-expanded="false" aria-controls="accordion-item-3-panel" data-wp-bind--aria-expanded="state.isOpen" data-wp-on--click="actions.toggle" id="accordion-item-3" type="button" class="wp-block-accordion-heading__toggle"><span class="wp-block-accordion-heading__toggle-title"></span><span class="wp-block-accordion-heading__toggle-icon" aria-hidden="true">+</span></button></h3>



<div aria-labelledby="accordion-item-3" data-wp-bind--hidden="state.isHidden" data-wp-on--beforematch="actions.handleBeforeMatch" id="accordion-item-3-panel" role="region" class="wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow">
<p class="wp-block-paragraph"></p>
</div>
</div>
</div>
</div>
</div>
</div>



<div data-wp-context="{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }" data-wp-interactive="core/accordion" role="group" class="wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow">
<div data-wp-class--is-open="state.isOpen" data-wp-context="{ &quot;id&quot;: &quot;accordion-item-5&quot;, &quot;openByDefault&quot;: false }" data-wp-init="callbacks.initAccordionItems" data-wp-on-window--hashchange="callbacks.hashChange" class="wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow">
<h3 class="wp-block-accordion-heading"><button aria-expanded="false" aria-controls="accordion-item-5-panel" data-wp-bind--aria-expanded="state.isOpen" data-wp-on--click="actions.toggle" id="accordion-item-5" type="button" class="wp-block-accordion-heading__toggle"><span class="wp-block-accordion-heading__toggle-title"><strong>What happens to the firestopping around fire dampers after a fire?</strong></span><span class="wp-block-accordion-heading__toggle-icon" aria-hidden="true">+</span></button></h3>



<div aria-labelledby="accordion-item-5" data-wp-bind--hidden="state.isHidden" data-wp-on--beforematch="actions.handleBeforeMatch" id="accordion-item-5-panel" role="region" class="wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow">
<p class="wp-block-paragraph">The <strong><a href="https://swiftfirecompliance.co.uk/fire-stopping-for-fire-dampers/" data-type="page" data-id="4501512" target="_blank" rel="noreferrer noopener">firestopping </a></strong>and surrounding construction at each damper penetration should be inspected as part of the post-fire assessment. Heat, firefighting water and physical damage from the incident can all compromise the integrity of the firestopping seal, which must be reinstated using an appropriate tested system before the penetration can be considered compliant. A closing damper surrounded by damaged firestopping does not provide effective compartmentation.<br></p>
</div>
</div>
</div>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/what-should-you-do-with-smoke-fire-dampers-after-a-fire/">What Should You Do With Smoke &amp; Fire Dampers After a Fire?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Fire Dampers vs Smoke Dampers: What’s the Difference?</title>
		<link>https://swiftfirecompliance.co.uk/article/fire-dampers-vs-smoke-dampers/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Mon, 24 Aug 2026 07:00:00 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<category><![CDATA[Fire Damper Testing]]></category>
		<category><![CDATA[Fire dampers]]></category>
		<category><![CDATA[Smoke dampers]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501583</guid>

					<description><![CDATA[<p>Fire dampers and smoke dampers are both installed within ventilation systems, but they perform slightly different safety functions. So, what is the difference between a fire damper and a smoke damper? What is a Fire Damper? A fire damper is designed to maintain fire compartmentation where ductwork passes through a fire-resisting wall or floor, and  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/fire-dampers-vs-smoke-dampers/">Fire Dampers vs Smoke Dampers: What’s the Difference?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Fire dampers and smoke dampers are both installed within ventilation systems, but they perform slightly different safety functions. So, what is the difference between a fire damper and a smoke damper?</p>



<h2 class="wp-block-heading"><strong>What is a Fire Damper?</strong></h2>



<p class="wp-block-paragraph">A fire damper is designed to maintain fire compartmentation where ductwork passes through a fire-resisting wall or floor, and when exposed to high temperatures, the damper closes to help prevent flames and heat from spreading through the ductwork into another part of the building.</p>



<p class="wp-block-paragraph"><strong>For a more detailed explanation of how fire dampers work and where they are installed, read our guide on <a href="https://swiftfirecompliance.co.uk/article/fire-dampers-explained/" target="_blank" rel="noreferrer noopener"><span style="text-decoration: underline;">fire dampers explained</span></a>.</strong></p>


<div class="wp-block-image">
<figure class="alignleft size-full"><img decoding="async" width="1200" height="630" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos.jpg" alt="" class="wp-image-4501631" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-200x105.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-300x158.jpg 300w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-400x210.jpg 400w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-600x315.jpg 600w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-768x403.jpg 768w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-800x420.jpg 800w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos-1024x538.jpg 1024w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Open-and-closed-FDs-graphics-and-photos.jpg 1200w" sizes="(max-width: 1200px) 100vw, 1200px" /></figure>
</div>


<div style="height:26px" aria-hidden="true" class="wp-block-spacer"></div>



<div style="background-color:#084686; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Key fact:</strong> A fire damper is a passive fire protection device. It does not rely on a control signal, a power supply, or a connection to the fire alarm system. It responds directly to heat through a fusible link mechanism, making it independent of the building&#8217;s active fire safety systems.</p>
</div>



<h2 class="wp-block-heading"><strong>What is a Smoke Damper?</strong></h2>



<figure class="wp-block-image size-large"><img decoding="async" width="1024" height="724" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-1024x724.png" alt="" class="wp-image-4501633" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-200x141.png 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-300x212.png 300w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-400x283.png 400w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-600x424.png 600w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-768x543.png 768w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-800x566.png 800w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-1024x724.png 1024w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-1200x848.png 1200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Smoke-damper-open-and-closed-graphic-1536x1086.png 1536w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">A smoke damper (often called a smoke control damper) is designed to manage the movement of smoke.</p>



<p class="wp-block-paragraph">It is usually connected to the building’s fire detection or smoke control system and can be instructed to open or close as part of a planned fire-safety sequence. This can help contain smoke, protect escape routes or support smoke extraction.</p>



<p class="wp-block-paragraph"><strong>The key difference</strong></p>



<p class="wp-block-paragraph">Put simply:</p>



<ul class="wp-block-list">
<li><strong>Fire dampers respond to heat and help maintain fire compartmentation.</strong></li>



<li><strong>Smoke dampers respond to a control signal and help manage smoke movement.</strong></li>
</ul>



<p class="wp-block-paragraph">Some systems use combined fire and smoke dampers, which are designed to perform both functions.</p>



<p class="wp-block-paragraph">Unlike fire dampers, smoke dampers require a power supply and a control interface to operate. Their performance depends not only on the damper itself but on the correct functioning of the fire detection system, smoke control panel, and associated wiring and controls.</p>



<h2 class="wp-block-heading">What Is a Combined Fire and Smoke Damper?</h2>



<p class="wp-block-paragraph">Some systems use combined fire and smoke dampers, which are designed to perform both functions within a single unit. A combined damper incorporates both a fusible link for thermal activation and a motorised actuator for control signal activation, allowing it to respond to either heat or a smoke detection signal.</p>



<p class="wp-block-paragraph">Combined dampers are increasingly common in modern buildings where both fire compartmentation and smoke control are required at the same ductwork penetration point. They require both passive and active maintenance, covering both the mechanical fusible link mechanism and the motorised actuator, control interface and power supply.</p>



<h3 class="wp-block-heading">The Key Difference at a Glance</h3>



<p class="wp-block-paragraph">Although fire dampers and smoke dampers are both fitted within ventilation ductwork, they perform different roles within a building’s fire safety strategy. A fire damper is usually heat activated and designed to close when its thermal element or fusible link operates, helping to maintain fire compartmentation. A smoke damper is typically motorised and responds to a signal from the building’s fire alarm, smoke detection or smoke control system to manage the movement of smoke. Combined fire and smoke dampers bring both functions together in one unit. </p>



<p class="wp-block-paragraph">The table below provides a simple comparison.</p>



<style>
  @import url('https://fonts.googleapis.com/css2?family=Baloo+Chettan+2:wght@400;500;600;700&display=swap');
</style>

<table style="width:100%; border-collapse:collapse; margin:30px 0; font-family:'Baloo Chettan 2', Arial, sans-serif;">
  <thead>
    <tr>
      <th style="background-color:#EF7720; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;"></th>
      <th style="background-color:#EF7720; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Fire Damper</th>
      <th style="background-color:#EF7720; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Smoke Damper</th>
      <th style="background-color:#EF7720; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Combined Damper</th>
    </tr>
  </thead>

  <tbody>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Primary function</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Maintains fire compartmentation</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Manages smoke movement</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Both functions in one unit</td>
    </tr>

    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Activation method</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Fusible link responds to heat</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Control signal from detection system</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Both thermal and control signal</td>
    </tr>

    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Power required</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">No</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Yes</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Yes</td>
    </tr>

    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd; font-weight:600;">Connected to fire alarm</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">No</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Yes</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Yes</td>
    </tr>

    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; font-weight:600;">Classification</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Passive fire protection</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Active fire protection</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Passive and active</td>
    </tr>
  </tbody>
</table>



<p class="wp-block-paragraph"><strong>To understand the mechanics behind both damper types in more detail, read our guide on <a href="https://swiftfirecompliance.co.uk/article/how-do-fire-and-smoke-dampers-work/" target="_blank" rel="noreferrer noopener"><span style="text-decoration: underline;">how fire and smoke dampers work</span></a>.</strong></p>



<h2 class="wp-block-heading"><strong>How Does DW145 Apply?</strong></h2>


<div class="wp-block-image">
<figure class="alignright size-full"><a href="https://publications.thebesa.com/products/installation-maintenance-fire-dampers" target="_blank" rel=" noreferrer noopener"><img decoding="async" width="250" height="353" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/DW145-cover-250px.jpg" alt="" class="wp-image-4501589" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/DW145-cover-250px-200x282.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/DW145-cover-250px-212x300.jpg 212w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/DW145-cover-250px.jpg 250w" sizes="(max-width: 250px) 100vw, 250px" /></a></figure>
</div>


<p class="wp-block-paragraph">DW145, published by the Building Engineering Services Association, provides guidance on the design, installation, inspection and maintenance of both fire and smoke control dampers. It was revised in 2024 and sets the recognised industry standard for what competent damper installation and testing should involve.</p>



<p class="wp-block-paragraph">The guidance also notes that the damper, supporting construction, and penetration seal must work together; a compliant damper won’t function properly if installed incorrectly or if the surrounding fire stopping is insufficient.</p>



<p class="wp-block-paragraph">The guidance emphasises several key principles that apply equally to fire dampers, smoke dampers and combined units:</p>



<ul class="wp-block-list">
<li>Every damper must be properly identified and included in the building&#8217;s asset register</li>



<li>Dampers must be easily accessible for inspection, testing and repair</li>



<li>Installation must follow manufacturer guidance and the tested method for the specific application</li>



<li>The damper, its supporting construction, and the surrounding fire-stopping must work together as a system</li>



<li>Function testing must be carried out at appropriate intervals by a competent person</li>



<li>Test reports must clearly distinguish operational results from wider installation observations</li>
</ul>



<p class="wp-block-paragraph">A compliant damper in an otherwise poor installation is not a compliant installation. The guidance makes clear that the performance of the damper cannot be assessed in isolation from the construction it sits within.</p>



<p class="wp-block-paragraph"><strong>For a full breakdown of what DW145 requires and how it applies to your building, read our<span style="text-decoration: underline;"> <a href="https://swiftfirecompliance.co.uk/article/dw145-fire-damper-compliance-guide-for-uk-buildings/" target="_blank" rel="noreferrer noopener">DW145 fire damper compliance guide for UK buildings</a></span>.</strong></p>



<h2 class="wp-block-heading"><strong>What Facilities Managers Need to Know</strong></h2>



<p class="wp-block-paragraph">Facilities managers should ensure that:</p>



<ul class="wp-block-list">
<li>Every damper, no matter the type, is identified and included in the building’s asset register.</li>



<li>Suitable access is available for inspection, testing and maintenance.</li>



<li>Installation and maintenance follow the manufacturer’s instructions and relevant DW145 guidance.</li>



<li>Function testing is completed at the appropriate intervals by a competent person.</li>



<li>Any defects, obstructions or access issues are recorded and corrected.</li>



<li>Fire alarm and smoke control interfaces are tested where applicable.</li>
</ul>



<p class="wp-block-paragraph">Installing the correct damper is only part of the solution. It must also be accessible, maintained and able to operate as intended throughout the life of the building.</p>



<p class="wp-block-paragraph">Swift Fire Compliance can help you understand your damper inventory, identify compliance gaps and arrange appropriate inspection and testing.</p>



<p class="wp-block-paragraph"><strong>Important: A smoke damper that closes correctly but is disconnected from the fire detection system will not respond in a real emergency. Control interfaces, actuators and power supplies must all be included within the testing programme, not just the mechanical operation of the damper itself.</strong></p>



<div style="background-color:#1C97CF; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Tip for facilities managers:</strong> Where combined fire and smoke dampers are installed, both the thermal activation mechanism and the motorised actuator must be tested. Testing only one aspect of the damper does not confirm that the complete unit will perform correctly in a fire. Make sure your testing contractor checks and records both functions.</p>
</div>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
<h3 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Not Sure What Type of Dampers Your Building Has?</h3>
<p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;">Swift Fire Compliance can survey your building, identify every damper in your asset register, and arrange appropriate inspection and testing for fire dampers, smoke dampers and combined units across your estate.</p>
<a href="https://swiftfirecompliance.co.uk/contact/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block; margin-right:10px;">Speak to Our Team</a>
<a href="tel:0800243471" style="background-color:#084686; color:#ffffff; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Call Us: 0800 243 471</a>
</div>



<h2 class="wp-block-heading">Your Fire and Smoke Damper Questions Answered</h2>



<h3 class="wp-block-heading">What is the main difference between a fire damper and a smoke damper?</h3>



<p class="wp-block-paragraph">A fire damper responds to heat through a fusible link mechanism and closes automatically to maintain fire compartmentation at a duct penetration in a fire-resisting wall or floor. A smoke damper responds to a control signal from the building&#8217;s fire detection or smoke control system and is used to manage the movement of smoke as part of a planned fire safety sequence. Fire dampers are passive fire protection devices. Smoke dampers are active fire protection devices that require a power supply and control interface to operate.</p>



<h3 class="wp-block-heading">Do fire dampers and smoke dampers need to be tested differently?</h3>



<p class="wp-block-paragraph">Yes. A fire damper function test involves triggering the fusible link or thermal activation mechanism to confirm that the damper closes fully and can be correctly reset. A smoke damper test must also verify that the motorised actuator operates correctly when a control signal is received, that the damper responds as expected within the smoke control sequence, and that the power supply and control interface are functioning. Combined dampers require both elements to be tested.</p>



<h3 class="wp-block-heading">How often should smoke dampers be tested?</h3>



<p class="wp-block-paragraph">Smoke dampers should be tested at intervals specified by the building&#8217;s smoke control system maintenance programme and in line with BS 9999:2017. The testing frequency may differ from that of standard fire dampers and should be confirmed through a site-specific assessment. Where combined fire and smoke dampers are installed, both the thermal and motorised activation functions should be tested at the appropriate intervals. <strong>For a full guide to testing intervals, including annual testing requirements and when more frequent inspections may be needed, read our article on <span style="text-decoration: underline;"><a href="https://swiftfirecompliance.co.uk/article/how-often-should-fire-smoke-dampers-be-tested/" target="_blank" rel="noreferrer noopener">how often fire and smoke dampers should be tested</a></span></strong></p>



<h3 class="wp-block-heading">Who is responsible for ensuring fire and smoke dampers are tested?</h3>



<p class="wp-block-paragraph">Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person bears legal accountability for ensuring that fire safety systems, including fire and smoke dampers, are maintained in an efficient state and in good working order. This responsibility cannot be transferred by appointing a contractor. The Responsible Person must ensure that testing is carried out to the required standard and that documentation is retained as evidence of compliance.</p>



<p class="wp-block-paragraph"><span style="text-decoration: underline;">For a more detailed explanation of legal accountability, duty holder responsibilities and the role of competent contractors,<strong> <a href="https://swiftfirecompliance.co.uk/article/who-is-responsible-for-fire-damper-testing-in-the-uk/" target="_blank" rel="noreferrer noopener">read our guide to who is responsible for fire damper testing in the UK</a></strong></span></p>



<h3 class="wp-block-heading">What happens if a smoke damper fails its test?</h3>



<p class="wp-block-paragraph">A smoke damper that fails its test represents a gap in the building&#8217;s smoke control strategy. The fault should be recorded in the inspection report with a clear description of the nature of the failure and the recommended remedial action. The responsible person should arrange for remedial works to be completed promptly and the damper retested on completion. Swift Fire Compliance can carry out remedial works and retesting as part of an integrated programme.</p>



<p class="wp-block-paragraph"><strong>To understand the common faults that can prevent dampers from operating correctly, and how a planned testing and maintenance programme can reduce the risk of failure, <a href="https://swiftfirecompliance.co.uk/article/common-fire-damper-failures-and-how-to-prevent-them/" target="_blank" rel="noreferrer noopener"><span style="text-decoration: underline;">read our guide to common fire damper failures and how to prevent them</span></a>.<br></strong>.</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/fire-dampers-vs-smoke-dampers/">Fire Dampers vs Smoke Dampers: What’s the Difference?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Can You Prove Where Every Fire Damper Is?</title>
		<link>https://swiftfirecompliance.co.uk/article/can-you-prove-where-every-fire-damper-is/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Mon, 10 Aug 2026 13:27:34 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<category><![CDATA[Fire Damper Testing]]></category>
		<category><![CDATA[Fire dampers]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501541</guid>

					<description><![CDATA[<p>Fire dampers are often hidden above ceilings, inside service risers or behind access panels. This makes them easy to overlook, but difficult to manage properly if you do not have accurate records. As a facilities manager, you should be able to answer three simple questions: Where is every fire damper in the building? When was  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/can-you-prove-where-every-fire-damper-is/">Can You Prove Where Every Fire Damper Is?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Fire dampers are often hidden above ceilings, inside service risers or behind access panels. This makes them easy to overlook, but difficult to manage properly if you do not have accurate records.</p>



<p class="wp-block-paragraph">As a facilities manager, you should be able to answer three simple questions:</p>



<ul class="wp-block-list">
<li>Where is every fire damper in the building?</li>



<li>When was each damper last inspected and function tested?</li>



<li>Can you provide evidence of the result?</li>
</ul>



<p class="wp-block-paragraph">If you cannot answer all three confidently, there may be gaps in your fire safety records.</p>



<h2 class="wp-block-heading"><strong>Why Locating Every Fire Damper Matters</strong></h2>


<div class="wp-block-image">
<figure class="alignleft size-full is-resized"><img decoding="async" width="300" height="400" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Looking-through-access-2.jpg" alt="" class="wp-image-4501543" style="width:368px;height:auto" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Looking-through-access-2-200x267.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Looking-through-access-2-225x300.jpg 225w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Looking-through-access-2.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /></figure>
</div>


<p class="wp-block-paragraph">Fire dampers are installed where ventilation ductwork passes through fire-resisting walls, floors or partitions. If a fire occurs, they are designed to close and help slow the spread of fire and smoke through the ductwork.</p>



<p class="wp-block-paragraph">However, a damper cannot be properly <a href="https://swiftfirecompliance.co.uk/fire-damper-testing/" target="_blank" rel="noreferrer noopener"><span style="text-decoration: underline;"><strong>inspected, tested or maintained</strong></span></a> if nobody knows where it is, or if it cannot be safely accessed.</p>



<p class="wp-block-paragraph">In a large or complex building, there may be hundreds of dampers. Drawings may be out of date, labels may be missing and previous reports may use inconsistent descriptions. Refurbishment work can also cover access panels or make existing location information unreliable.</p>



<p class="wp-block-paragraph">This is why every fire damper should have a clear identity and an accurate location.</p>



<h2 class="wp-block-heading"><strong>What Does DW145 Say?</strong></h2>



<p class="wp-block-paragraph"><a href="https://publications.thebesa.com/products/installation-maintenance-fire-dampers"><strong><span style="text-decoration: underline;">DW145</span></strong></a> is the Building Engineering Services Association’s (The BESA for short) guide to good practice for the installation, design, selection, inspection and maintenance of fire dampers.</p>



<p class="wp-block-paragraph">The guidance places importance on making sure dampers can be found and accessed for inspection, testing, maintenance and repair. It also supports good record keeping throughout the life of the building.</p>



<p class="wp-block-paragraph">For facilities managers, the message is straightforward: it is not enough to believe that all dampers have been tested. You need a clear audit trail showing which assets were found, accessed and tested, and what happened to any that could not be inspected.</p>



<style>
  @import url('https://fonts.googleapis.com/css2?family=Baloo+Chettan+2:wght@400;500;600;700&display=swap');
</style>

<div style="background-color:#D37930; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
  <p style="font-family:'Baloo Chettan 2', Arial, sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;">
    <strong style="font-weight:600;">The three compliance questions every facilities manager should be able to answer:</strong>
    Where is every fire damper in the building? When was each damper last inspected and function tested? Can you provide documented evidence of the result? If any of these cannot be answered confidently, your fire safety records have gaps that need to be addressed.
  </p>
</div>



<h2 class="wp-block-heading"><strong>Asset Tagging Creates a Clear Audit </strong>T<strong>rail</strong></h2>


<div class="wp-block-image">
<figure class="alignright size-full is-resized"><img decoding="async" width="300" height="400" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Fire-damper-asset-stickers-2.jpg" alt="" class="wp-image-4501544" style="width:247px;height:auto" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Fire-damper-asset-stickers-2-200x267.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Fire-damper-asset-stickers-2-225x300.jpg 225w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Fire-damper-asset-stickers-2.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /></figure>
</div>


<p class="wp-block-paragraph">Asset tagging gives every fire damper its own unique identification number. That number can then be used consistently on the physical label, asset register, photographs and inspection reports.</p>



<p class="wp-block-paragraph">For example, instead of recording a damper as ‘above ceiling near office,’ it can be identified as ‘FD-027’ with a precise building, floor and room location.</p>



<p class="wp-block-paragraph">This makes future inspections quicker and more consistent. It also helps facilities teams, contractors, auditors and enforcing authorities refer to the same asset without confusion.</p>



<p class="wp-block-paragraph">Most importantly, asset tagging helps prevent dampers from being missed. We utilise QR codes on our asset tag stickers to simplify recordkeeping and reporting consistently.</p>



<style>
  @import url('https://fonts.googleapis.com/css2?family=Baloo+Chettan+2:wght@400;500;600;700&display=swap');
</style>

<div style="background-color:#1C97CF; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
  <p style="font-family:'Baloo Chettan 2', Arial, sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;">
    <strong style="font-weight:600;">How Swift Fire Compliance approaches asset tagging:</strong>
    We utilise QR codes on our asset tag stickers. Scanning the QR code on any tagged damper links directly to that damper&#8217;s inspection record, test history and location data, making it simple for facilities teams, contractors, auditors and enforcing authorities to access consistent, up-to-date information about every asset in the building.
  </p>
</div>



<h2 class="wp-block-heading"><strong>How Our Fire Damper Inspection Service Can Help</strong></h2>



<p class="wp-block-paragraph">Swift Fire Compliance provides professional fire damper inspection and function-testing services for buildings across the UK.</p>



<p class="wp-block-paragraph">Our trained engineers can help locate and identify your fire dampers, inspect their condition and test that they operate correctly. Where appropriate, dampers can be asset tagged so that each one can be easily matched to your records.</p>



<p class="wp-block-paragraph">During an inspection, our engineers can check:</p>



<ul class="wp-block-list">
<li>Whether the damper can be safely accessed</li>



<li>Its general condition</li>



<li>The condition of the ductwork (which could involve testing as well if required).</li>
</ul>



<p class="wp-block-paragraph">Then during function testing we also check and report on:</p>



<ul class="wp-block-list">
<li>Whether there are visible obstructions, damage or corrosion</li>



<li>Whether it closes correctly during the function test</li>



<li>Whether it can be correctly reset</li>



<li>Whether there are installation or surrounding compartmentation concerns</li>



<li>Whether further remedial work is required</li>
</ul>



<style>
  @import url('https://fonts.googleapis.com/css2?family=Baloo+Chettan+2:wght@400;500;600;700&display=swap');

  .swift-fire-table {
    width: 100%;
    border-collapse: collapse;
    margin: 30px 0;
    font-family: 'Baloo Chettan 2', Arial, sans-serif;
  }

  .swift-fire-table th {
    background-color: #D37930;
    color: #ffffff;
    padding: 14px 16px;
    text-align: left;
    font-size: 16px;
    font-weight: 600;
  }

  .swift-fire-table td {
    padding: 12px 16px;
    font-size: 15px;
    line-height: 1.4;
    color: #333333;
    border-bottom: 1px solid #dddddd;
    vertical-align: top;
  }

  .swift-fire-table td:first-child {
    font-weight: 600;
  }

  .swift-fire-table tbody tr:nth-child(odd) {
    background-color: #F5F5F5;
  }

  .swift-fire-table tbody tr:nth-child(even) {
    background-color: #ffffff;
  }

  @media screen and (max-width: 700px) {
    .swift-fire-table {
      display: block;
      overflow-x: auto;
      white-space: normal;
    }

    .swift-fire-table th,
    .swift-fire-table td {
      min-width: 180px;
      padding: 10px 12px;
      font-size: 14px;
    }
  }
</style>

<table class="swift-fire-table">
  <thead>
    <tr>
      <th>Inspection Stage</th>
      <th>What We Check</th>
      <th>What It Tells You</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Location and access</td>
      <td>Whether each damper can be found and safely accessed</td>
      <td>Identifies accessibility issues that must be resolved before testing can proceed</td>
    </tr>

    <tr>
      <td>Physical condition</td>
      <td>Corrosion, damage, obstructions and ductwork condition</td>
      <td>Establishes whether the damper is likely to function and identifies remedial needs</td>
    </tr>

    <tr>
      <td>Function test</td>
      <td>Whether the damper closes fully and can be correctly reset</td>
      <td>Confirms operational status and provides the core compliance evidence</td>
    </tr>

    <tr>
      <td>Compartmentation</td>
      <td>Surrounding construction and installation concerns</td>
      <td>Identifies breaches in fire-resisting construction that may require remedial works</td>
    </tr>
  </tbody>
</table>



<p class="wp-block-paragraph">If a damper cannot be accessed or tested, this should not disappear from the records. Its status and location should be clearly reported, together with the recommended next steps to resolve the issue. An inaccessible damper is still a compliance obligation that must be managed, not ignored.</p>



<h2 class="wp-block-heading"><strong>How to Use Your Post-Visit Verification Report</strong></h2>



<p class="wp-block-paragraph">Following your inspection, refer to the post-visit verification report supplied by Swift Fire Compliance.</p>



<p class="wp-block-paragraph">This report provides the evidence needed to understand what was found during the visit. It should help you see which dampers were inspected, their unique references and locations, the test results, photographic evidence and any issues requiring attention.</p>



<p class="wp-block-paragraph">Your report should not be filed away and forgotten. Use it to update your building’s asset register, check that every expected damper has been accounted for, identify inaccessible or untested dampers, plan and prioritise remedial work as well as confirm that failed dampers have been repaired and retested.</p>



<p class="wp-block-paragraph">Most importantly. It will provide evidence during audits, insurance reviews or regulatory inspections, and you can also plan the next inspection programme</p>



<p class="wp-block-paragraph">If the number of dampers in the report does not match your drawings, previous records or expected asset total, further investigation may be necessary.</p>



<style>
  @import url('https://fonts.googleapis.com/css2?family=Baloo+Chettan+2:wght@400;500;600;700&display=swap');
</style>

<div style="background-color:#B91C1C; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
  <p style="font-family:'Baloo Chettan 2', Arial, sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;">
    <strong style="font-weight:600;">Important:</strong>
    If the number of dampers recorded in your post-visit verification report does not match your building drawings, previous reports or your expected asset total, further investigation is necessary. A discrepancy of this kind suggests that dampers may have been missed, that the building records are inaccurate, or that changes to the building have not been reflected in the compliance programme.
  </p>
</div>



<h2 class="wp-block-heading"><strong>Could You Prove it Today?</strong></h2>



<p class="wp-block-paragraph">If an auditor asked you today to show the location, condition and inspection history of every fire damper, could you do it?</p>



<p class="wp-block-paragraph">A clear asset register, consistent QR code tagging and a detailed post-visit verification report can turn a difficult question into a straightforward one. Together, they demonstrate that your dampers are known, accessible, regularly inspected and properly managed. That is the standard the <strong><span style="text-decoration: underline;"><a href="https://www.legislation.gov.uk/uksi/2005/1541/contents" target="_blank" rel="noreferrer noopener">Regulatory Reform (Fire Safety) Order 2005</a> </span></strong>expects of the <a href="https://swiftfirecompliance.co.uk/article/who-is-responsible-for-fire-damper-testing-in-the-uk/" data-type="post" data-id="2500746"><strong><span style="text-decoration: underline;">Responsible Person</span></strong></a>, and it is the standard that inspectors and insurers will measure you against.</p>


<div class="wp-block-image">
<figure class="alignright size-full is-resized"><img decoding="async" width="250" height="181" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Sam.jpg" alt="" class="wp-image-4501545" style="width:251px;height:auto" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Sam-200x145.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/08/Sam.jpg 250w" sizes="(max-width: 250px) 100vw, 250px" /></figure>
</div>


<p class="wp-block-paragraph">If you are unsure whether every fire damper in your building has been located, tagged and tested, book a call with Sam Thompson at Swift Fire Compliance. Sam can answer your questions, discuss your current records and help you plan the right inspection programme for your building.</p>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
<h3 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Book a Call with Sam Thompson</h3>
<p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;">If you are unsure whether every fire damper in your building has been located, tagged and tested, speak to Sam Thompson at Swift Fire Compliance. Sam can answer your questions, review your current records and help you plan the right inspection programme for your building.</p>
<a href="https://swiftfirecompliance.co.uk/contact/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block; margin-right:10px;">Book a Call with Sam</a>
<a href="tel:08002062707" style="background-color:#084686; color:#ffffff; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Call Us: 0800 206 2707</a>
</div>



<div style="height:36px" aria-hidden="true" class="wp-block-spacer"></div>



<h2 class="wp-block-heading">Your Fire Damper Location and Records Questions Answered</h2>



<h3 class="wp-block-heading"><strong>How do I find out how many fire dampers are in my building?</strong></h3>



<p class="wp-block-paragraph">The starting point is your building&#8217;s as-built drawings or fire strategy documentation, which should indicate where fire dampers have been installed. However, drawings are often out of date, particularly in buildings that have undergone refurbishment. A professional survey by a qualified fire damper specialist is the most reliable way to locate every damper, verify it against available records, and identify any that are missing from your documentation.</p>



<h3 class="wp-block-heading"><strong>What should I do if a fire damper cannot be accessed during an inspection?</strong></h3>



<p class="wp-block-paragraph">An inaccessible damper cannot be function tested and therefore cannot be confirmed as compliant. It should be recorded in the inspection report with its location, the reason it could not be accessed, and the recommended remedial action, which typically involves installing a suitable access panel. The Responsible Person should arrange for this work to be completed and the damper retested as soon as reasonably practicable. Leaving an inaccessible damper unresolved is not an acceptable outcome from a compliance perspective.</p>



<h3 class="wp-block-heading"><strong>What is the difference between a fire damper inspection and a function test?</strong></h3>



<p class="wp-block-paragraph">A fire damper inspection involves a visual assessment of the damper&#8217;s physical condition, including checks for corrosion, damage, obstructions and surrounding compartmentation concerns. A function test, also known as a drop test, involves triggering the damper to confirm that it closes fully and correctly and can be reset to its operational position. Both are required for a compliant testing programme. An inspection without a function test does not confirm that the damper will operate in a fire.</p>



<h3 class="wp-block-heading"><strong>How long should fire damper inspection records be kept?</strong></h3>



<p class="wp-block-paragraph">There is no single statutory retention period for fire damper test records, but best practice is to retain them for the lifetime of the building or at least for a minimum period consistent with your insurer&#8217;s requirements. Maintaining a complete and continuous inspection history for every damper is valuable in the event of a fire safety audit, insurance claim or regulatory investigation. Our online client portal stores your inspection records securely and makes them accessible at any time.</p>



<h3 class="wp-block-heading"><strong>What happens if a fire damper fails its function test?</strong></h3>



<p class="wp-block-paragraph">A damper that fails its function test must be repaired or replaced as soon as reasonably practicable. The failure should be clearly recorded in the post-visit verification report along with the nature of the fault and the recommended remedial action. Once repairs are complete, the damper must be retested and the updated result documented. Swift Fire Compliance can carry out remedial works and retesting as part of a single managed programme, ensuring your records reflect the current compliant status of every damper.</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/can-you-prove-where-every-fire-damper-is/">Can You Prove Where Every Fire Damper Is?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Often Do Kitchen Extract Systems Need Cleaning?</title>
		<link>https://swiftfirecompliance.co.uk/article/how-often-do-kitchen-extract-systems-need-cleaning/</link>
		
		<dc:creator><![CDATA[Abbey Maxwell]]></dc:creator>
		<pubDate>Fri, 24 Jul 2026 08:00:00 +0000</pubDate>
				<category><![CDATA[Blog]]></category>
		<category><![CDATA[Care Homes]]></category>
		<category><![CDATA[Kitchen extract cleaning]]></category>
		<category><![CDATA[Schools]]></category>
		<guid isPermaLink="false">https://swiftfirecompliance.co.uk/?p=4501425</guid>

					<description><![CDATA[<p>If you manage or own a commercial kitchen, you’ve likely wondered how often your extract system needs to be cleaned. The exact answer varies depending on several factors, such as the system’s design and age, how intensively the kitchen is used, and the type of cooking carried out. However, one point is undeniable: routine cleaning  [...]</p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/how-often-do-kitchen-extract-systems-need-cleaning/">How Often Do Kitchen Extract Systems Need Cleaning?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="has-large-font-size wp-block-paragraph">If you manage or own a commercial kitchen, you’ve likely wondered how often your extract system needs to be cleaned. The exact answer varies depending on several factors, such as the system’s design and age, how intensively the kitchen is used, and the type of cooking carried out. However, one point is undeniable: routine cleaning is vital to maintain safety, hygiene, compliance, and efficient operation.</p>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>


<div class="wp-block-image">
<figure class="alignright size-full is-resized"><img decoding="async" width="300" height="287" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Hidden-fire-risk-grease-from-KE-300px.jpg" alt="" class="wp-image-4501427" style="aspect-ratio:1.0453066332916146;width:264px;height:auto" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Hidden-fire-risk-grease-from-KE-300px-200x191.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Hidden-fire-risk-grease-from-KE-300px.jpg 300w" sizes="(max-width: 300px) 100vw, 300px" /><figcaption class="wp-element-caption"><em>Grease removed from a kitchen extract system</em></figcaption></figure>
</div>


<p class="wp-block-paragraph"><strong><span style="text-decoration: underline;"><a href="https://swiftfirecompliance.co.uk/kitchen-extract-cleaning/" target="_blank" rel="noreferrer noopener">Kitchen extraction systems</a></span></strong> are designed to remove airborne grease, smoke, heat, and cooking odours. As time passes, grease gradually accumulates within components such as canopies, filters, plenums, ducting, and fans. If left untreated, this build-up can pose a serious fire hazard and reduce the effectiveness of the ventilation system.</p>



<p class="wp-block-paragraph">To address this, <a href="https://publications.thebesa.com/products/grease-specification-fire-risk-management-kitchen-extraction" target="_blank" rel="noreferrer noopener"><strong><span style="text-decoration: underline;">TR19® Grease</span></strong></a> &#8211; the recognised industry specification published by the Building Engineering Services Association (BESA) and co-authored by our Managing Director Gary Nicholls &#8211; outlines recommended cleaning intervals and measurable cleanliness standards.</p>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
  <h3 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Check Your Compliance</h3>
  <p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;">If you are unsure whether your system is fully compliant, speak to our team today for expert advice and support.</p>
  <a href="https://swiftfirecompliance.co.uk/compliance-checker/kitchen-extract-cleaning/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block; margin-right:10px;">Check Your Compliance</a>
  <a href="tel:0800243471" style="background-color:#084686; color:#ffffff; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Call Our Specialists &#8211; 0800 243471</a>
</div>



<h2 class="wp-block-heading">TR19® Grease Cleaning Guidelines</h2>



<p class="wp-block-paragraph">Cleaning frequency is determined largely by the number of hours your kitchen operates each day. The table below sets out the standard cleaning intervals:</p>



<table style="width:100%; border-collapse:collapse; margin:30px 0; font-family:sans-serif;">
  <thead>
    <tr>
      <th style="background-color:#D37930; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Usage Level</th>
      <th style="background-color:#D37930; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Operating Hours</th>
      <th style="background-color:#D37930; color:#ffffff; padding:14px 16px; text-align:left; font-size:15px;">Recommended Cleaning Frequency</th>
    </tr>
  </thead>
  <tbody>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Heavy use</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">12 to 16 hours per day</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Require professional cleanin every 3 months</td>
    </tr>
    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Moderate use</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">6 to 12 hours per day</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Should be cleaned every 6 months</td>
    </tr>
    <tr style="background-color:#f5f5f5;">
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Light use</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">2 to 6 hours per day</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333; border-bottom:1px solid #dddddd;">Typically require cleaning every 12 months</td>
    </tr>
    <tr style="background-color:#ffffff;">
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Solid fuel cooking</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">Variable</td>
      <td style="padding:12px 16px; font-size:15px; color:#333333;">More frequent &#8211; Solid fuel appliances (e.g. wood-fired ovens or charcoal cooking) may need more frequent attention due to higher volumes of combustible residue.</td>
    </tr>
  </tbody>
</table>
<p style="font-family:sans-serif; font-size:13px; color:#666666; margin-top:8px;">Based on TR19 Grease guidance. Frequency should be confirmed through a site-specific risk assessment.</p>



<p class="wp-block-paragraph">TR19® Grease also specifies that grease deposits within ductwork should not exceed an average thickness of 200 microns. Although this may seem minimal &#8211; around half the thickness of a standard business card &#8211; even this level of build-up can significantly increase fire risk, especially during warmer conditions.</p>



<h3 class="wp-block-heading">Understanding the 200 Micron Grease Limit</h3>



<p class="wp-block-paragraph">TR19 Grease sets a measurable cleanliness standard &#8211; grease deposits within ductwork should not exceed an average of 200 microns across the surface of the system. To put this into perspective, 200 microns is roughly half the thickness of a standard business card. A layer of grease this thin is easy to underestimate visually, yet it already represents the maximum permitted level under TR19 Grease.</p>


<div class="wp-block-image">
<figure class="alignleft size-full"><img decoding="async" width="225" height="166" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Scrape-Marking.png" alt="" class="wp-image-4501431" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Scrape-Marking-200x148.png 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Scrape-Marking.png 225w" sizes="(max-width: 225px) 100vw, 225px" /><figcaption class="wp-element-caption"><em>Wet Film Thickness Test</em></figcaption></figure>
</div>


<p class="wp-block-paragraph">To measure this accurately, a Wet Film Thickness Test can be performed. This involves using a specialist gauge to determine the thickness of grease deposits, providing clear, measurable data on system cleanliness.</p>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">Why Compliance with TR19® Grease Matters</h2>



<p class="wp-block-paragraph">Grease is highly flammable, and even a thin layer inside ductwork can allow fire to ignite and spread quickly throughout a building. TR19® Grease was created to help businesses manage this risk through structured inspection, testing, and cleaning practices.</p>



<p class="wp-block-paragraph">Keeping your system compliant offers several benefits:</p>



<ul class="wp-block-list">
<li>Reduces the likelihood of fire</li>



<li>Supports adherence to fire safety regulations</li>



<li>Improves airflow and system efficiency</li>



<li>Helps lower energy usage</li>



<li>Promotes a cleaner, healthier kitchen environment</li>
</ul>



<p class="wp-block-paragraph">Importantly, compliance also plays a key role in meeting insurance requirements. Many insurers now expect documented proof that cleaning has been carried out in line with TR19® Grease. Failure to provide this evidence could affect a claim if a fire occurs.</p>



<div style="background-color:#B91C1C; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Fire safety fact:</strong> The <a href="https://www.abi.org.uk/" target="_blank" rel="noopener" style="color:#ffffff; font-weight:bold; text-decoration:underline;">Association of British Insurers</a> estimates that around 70 percent of commercial kitchen fires in the UK are attributed to the grease extract ventilation system. Regular, documented cleaning to TR19 Grease standards is one of the most effective ways to manage this risk.</p>
</div>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">What Does the Law Require?</h2>



<p class="wp-block-paragraph">Under the <strong><span style="text-decoration: underline;"><a href="https://www.legislation.gov.uk/uksi/2005/1541/contents" target="_blank" rel="noreferrer noopener">Regulatory Reform (Fire Safety) Order 2005</a></span></strong>, the Responsible Person &#8211; typically the building owner, employer, or facilities manager — has a legal duty to ensure that fire risks within the building are identified and properly managed. A grease-filled kitchen extract system that has not been cleaned in line with recognised standards is a documented, unmanaged fire risk. It is the Responsible Person&#8217;s legal accountability, not simply an operational oversight.</p>



<p class="wp-block-paragraph">TR19 Grease, the recognised industry specification published by the Building Engineering Services Association and co-authored by Gary Nicholls, Managing Director of Swiftclean, provides the accepted standard against which kitchen extract compliance is assessed. Following TR19 Grease is the recognised way of demonstrating that a duty holder has met their obligations under fire safety legislation.</p>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">Who Is Responsible for Kitchen Extract Compliance?</h2>



<p class="wp-block-paragraph">The Responsible Person under the Regulatory Reform (Fire Safety) Order 2005 bears legal accountability for ensuring kitchen extract systems are maintained in a safe condition. This responsibility cannot be passed on by appointing a cleaning contractor. The Responsible Person must ensure that the contractor is competent, that cleaning is carried out to TR19 Grease standards, and that compliance documentation is retained.</p>



<p class="wp-block-paragraph">In the event of a kitchen fire, the absence of TR19-compliant cleaning records can affect both insurance claims and any subsequent legal or regulatory investigation. Documentation is as important as the clean itself.</p>



<p class="wp-block-paragraph"><strong>Not sure who holds the Responsible Person title in your organisation? Read our guide on <span style="text-decoration: underline;"><a href="https://swiftfirecompliance.co.uk/article/who-is-responsible-for-fire-damper-testing-in-the-uk/" target="_blank" rel="noreferrer noopener">who is responsible for fire safety compliance in the UK</a></span>.</strong></p>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">Is Following a Set Schedule Enough?</h2>


<div class="wp-block-image">
<figure class="alignleft size-full"><img decoding="async" width="500" height="375" src="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Cooking-in-a-commercial-kitchen-500px.jpg" alt="" class="wp-image-4501432" srcset="https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Cooking-in-a-commercial-kitchen-500px-200x150.jpg 200w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Cooking-in-a-commercial-kitchen-500px-300x225.jpg 300w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Cooking-in-a-commercial-kitchen-500px-400x300.jpg 400w, https://swiftfirecompliance.co.uk/wp-content/uploads/2026/07/Cooking-in-a-commercial-kitchen-500px.jpg 500w" sizes="(max-width: 500px) 100vw, 500px" /></figure>
</div>


<p class="wp-block-paragraph">While recommended cleaning intervals are a useful baseline, they don’t always reflect every kitchen’s reality.</p>



<p class="wp-block-paragraph">Factors such as cooking style, menu, customer volume, and system design all influence how quickly grease accumulates. For instance, a kitchen with heavy frying activity may need cleaning more often than another operating for similar hours but producing less grease.</p>



<p class="wp-block-paragraph">TR19® Grease also introduced measurable standards, meaning systems should be assessed based on actual grease levels. If deposits exceed acceptable limits (200 microns), cleaning should be carried out sooner than planned. Regular professional inspections are the best way to ensure your schedule remains appropriate.</p>



<div style="background-color:#084686; padding:24px 30px; margin:30px 0; box-sizing:border-box;">
<p style="font-family:sans-serif; font-size:16px; color:#ffffff; line-height:1.6; margin:0;"><strong>Did you know?</strong> A Wet Film Thickness Test uses a precision-toothed gauge to measure grease deposits inside ductwork, providing objective, quantifiable data on whether a system meets TR19 Grease standards. This is the recognised method for verifying compliance before and after a professional clean.</p>
</div>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">How Swiftclean Can Support You</h2>



<p class="wp-block-paragraph">At Swiftclean, we specialise in kitchen extract fire safety cleaning in full accordance with the TR19® Grease specification. Our trained technicians clean and assess all parts of your system, including canopies, filters, plenums, ductwork, risers, and extract fans.</p>



<p class="wp-block-paragraph">We work with a wide range of sectors &#8211; from schools and hospitals to restaurants, hotels, stadiums, and food production facilities &#8211; helping clients determine the correct cleaning frequency and providing the certification needed for compliance and insurance purposes.</p>



<p class="wp-block-paragraph">If you’re unsure when your system was last serviced, or whether your current maintenance plan is adequate, our team can evaluate your system and recommend the best course of action to keep it safe, compliant, and efficient.</p>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
<h3 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Is Your Kitchen Extract System Compliant?</h3>
<p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;">If you are unsure whether your system has been cleaned to TR19 Grease standards, or when it was last serviced, speak to our team or use our free compliance checker.</p>
<a href="https://swiftfirecompliance.co.uk/contact/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block; margin-right:10px;">Speak to Our Team</a>
<a href="https://swiftfirecompliance.co.uk/compliance-checker/kitchen-extract-cleaning/" style="background-color:#084686; color:#ffffff; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Check Your Compliance</a>
</div>



<hr class="wp-block-separator has-alpha-channel-opacity is-style-wide"/>



<h2 class="wp-block-heading">Your Kitchen Extract Fire Safety Questions Answered<br></h2>



<h3 class="wp-block-heading">How can I find out if my extract system has ever been cleaned?</h3>



<p class="wp-block-paragraph">If your system is brand new or you’ve recently taken over a premises without maintenance records, it can be difficult to confirm its history. In this situation, a grease thickness assessment is recommended. This will indicate whether deposits have reached potentially dangerous levels.</p>



<h3 class="wp-block-heading">What are the signs that my system has been cleaned?</h3>



<p class="wp-block-paragraph">You may notice access panels along the ductwork, which are typically installed to allow cleaning and inspection. However, visual checks alone aren’t sufficient to confirm compliance. The most reliable method is to measure grease levels within the system and compare them to acceptable standards.</p>



<p class="wp-block-paragraph">It’s also important to check your insurance policy, as this may define specific cleanliness requirements.</p>



<h3 class="wp-block-heading">How do I know if my system meets insurance requirements?</h3>



<p class="wp-block-paragraph">Review your insurance policy carefully to understand any conditions relating to ventilation hygiene. Many insurers specify cleaning intervals, documentation, and compliance with standards such as TR19® Grease.</p>



<p class="wp-block-paragraph">If TR19® Grease is referenced, cleaning must be carried out by a qualified contractor. Choosing a provider listed on recognised schemes, such as the BESCA Ventilation Hygiene Register (VHR), can help ensure compliance and protect your cover in the event of a claim.</p>



<h3 class="wp-block-heading">What is a canopy plenum?</h3>



<p class="wp-block-paragraph">A canopy plenum is an enclosed air chamber within a ventilation hood that controls and directs airflow. Commonly used in commercial kitchens, it serves two primary purposes: either removing smoke and grease or supplying fresh replacement air. It is situated behind the filters.</p>



<div style="background-color:#D37930; padding:40px 30px; text-align:center; margin:30px 0; box-sizing:border-box;">
  <h2 style="color:#ffffff; font-family:sans-serif; font-size:22px; margin:0 0 12px 0;">Download Our Kitchen Extract Compliance Guide</h2>
  <p style="color:#ffffff; font-family:sans-serif; font-size:16px; margin:0 0 24px 0;"> For more information on keeping your kitchen extract system compliant download our free guide. Click the button and complete the form to receive your copy of our comprehensive guide and get the essential information you need to maintain a safe and compliant system.</p>
  <a href="https://swiftfirecompliance.co.uk/guide/keeping-your-kitchen-extract-system-compliant/" style="background-color:#ffffff; color:#D37930; font-family:sans-serif; font-size:16px; font-weight:bold; padding:14px 32px; text-decoration:none; border-radius:4px; display:inline-block;">Download the Guide</a>
</div>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://swiftfirecompliance.co.uk/article/how-often-do-kitchen-extract-systems-need-cleaning/">How Often Do Kitchen Extract Systems Need Cleaning?</a> appeared first on <a href="https://swiftfirecompliance.co.uk">Swift Fire Compliance</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>

<!--
Performance optimized by W3 Total Cache. Learn more: https://www.boldgrid.com/w3-total-cache/?utm_source=w3tc&utm_medium=footer_comment&utm_campaign=free_plugin

Page Caching using Disk: Enhanced 

Served from: swiftfirecompliance.co.uk @ 2026-11-20 07:07:27 by W3 Total Cache
-->